As a grinding tool, the Diamond cup grinding wheel is suitable for removing corners, solder joints, burrs and burrs on the surface of metal materials, and repairing uneven surfaces.
Another type of grinding wheel is mainly composed of a large grinding wheel and a small grinding wheel. The diameter of the big wheel is 26 inches, which is about 0.66 meters. The small grinding wheel is used to stabilize the entire grinding wheel and help change the direction of travel of the grinding wheel. Its maximum load capacity can reach 120 kg, so it is suitable for most people. Even when driving on the road, the user can drive freely.
Diamond grinding wheels are widely used to grind high-hardness materials and precious materials that are difficult to grind with ordinary grinding wheels and require high quality. For the grinding and cutting of non-metallic workpieces such as cemented carbide, ceramics, glass, agate, gemstones, semiconductor materials, stone, etc., it is also suitable for titanium alloys.
Most industrial diamonds are used to make abrasive tools. The hardness of diamond is extremely high, 2 times, 3 times and 4 times that of boron carbide, silicon carbide and corundum respectively. It can grind extremely hard workpieces and has the advantages of high grinding efficiency, good wear resistance, low grinding force, low grinding temperature and good processing quality. Therefore, it is more and more widely used in the grinding of cemented carbide and other superhard cutting tools, as well as the cutting and grinding of materials such as glass and gems.